Before you begin, figure the dirt you need by multiplying the dimensions of the couch you plan to make (ours was 8x4x4 feet, or 128 cubic feet). Next, put on some old clothes—things are going to get messy—and locate a suitable spot. Placement is key: There’ll be no moving once you’ve begun. Clear the area of grass and weeds until you have a level swath of dirt, then use a stick to sketch the shape of the couch into the dirt with a stick.
Drive the wood stakes into the ground along the perimeter of your sofa-shaped sketch, every 18 inches or so, to a depth of about 12 inches. These will secure the form.
Attach the waferboard to the stakes to create the walls of the form. Use a handsaw to trim the waferboard to size. Drive in a nail every 4 inches along each stake to secure the boards.
Start shoveling dirt into the form. Here’s where things get messy. Once a foot of dirt is in place, water lightly and compress by stomping around on top of it.
Once the basic shape is in place and secure, carefully remove the form works.
Mold the shape to your liking. Remove any loose debris and sprinkle the sofa and other areas you’ll be sodding with a healthy layer of fertilizer and gypsite. Water lightly.
For extra support, lay strips of poultry netting over the arms and back.
Lay the sod. Press down the edges to create a smooth surface clear to the ground. Stagger the rows so the seams don’t fall in a line, and use chopsticks or planting stakes to keep them in place over the wire.
During the next few weeks, water your sofa often, soaking it thoroughly. Once the sod has taken root, remove the chopsticks or planting stakes. Trim as needed.
No comments:
Post a Comment